Making a Spiral Template for Walking Foot Quilting

Working on UFO’s is very satisfying! My current WIP (Work In Progress) became a UFO way back in July 2018. I suspect I couldn’t figure a way of quilting over or around such a variety of 6″ blocks so abandoned the quilt top along with a pieced backing including an integrated label (wahoo!) and a piece of cotton wadding cut to size.

Looking at the quilt after a two year break I decided to stitch a spiral to fill in the centre of the quilt and continue using the walking foot to echo some straight lines through the borders.

First task to tackle with a spiral design is drawing one! I used Yvonne Fuch’s method to draw the centre of a spiral. I drew mine onto a sheet of paper continuing the spiral lines until they were 2″ apart – the spacing I planned to use in the quilt stitching. To transfer this spiral onto the quilt I opted to make a template. Not having any template plastic to hand, I cut up an old, clear plastic, zip lock folder and traced my spiral using a permanent marker. I then cut along the spiral twice to create a narrow opening to use as a stencil.

(On reflection the template would be more stable if I hadn’t cut a continuous spiral but had instead left some little ‘bridges’ of plastic like those found on commercially produced stencils).

I tested out the template on a practice quilt sandwich using a Hera Marker. The groove left by the marker was a little hard to see (even with side lighting as suggested by Yvonne) but for a first attempt I thought my spiral had worked reasonably well.

Stitching the first few ‘spins’ of a spiral using a walking foot can be a bit tricky especially when starting from the centre of a quilt as the tightest turns are being made with half of the quilt stuffed through the throat of the sewing machine. Tips for achieving this initial tricky maneuver include reducing stitch length and being prepared to stop every few stitches (with needle down), lift the foot and shift the quilt to keep the walking foot on the curve. As the spiral increases in size the stitch length can be increased and stopping to realign the walking foot will become less and less necessary ๐Ÿ™‚

I used the template and Hera Marker to start the spiral in the centre of my quilt. I chose to use a Hera rather than a marker pen or chalk as the fabric in the centre of the quilt just happened to be pure white ๐Ÿ™ Being anxious about using coloured markers anyway I just couldn’t bring myself to use one on white fabric slap-bang in the middle of a quilt top!

๐Ÿ˜‰ It took two attempts to stitch reasonable curves but I’m happy with this and will be keeping my spiral template for future projects.

Two inch spiral seen on the back of the Chocolatier quilt. I used my walking foot with an adjustable guide bar to keep the stitching lines 2″ apart.

If you’d like to have a go at making your own spiral template you are welcome to download and print my drawing of a spiral if it would help ๐Ÿ™‚ Here is the link for the download: Spiral by Allison Reid New Every Morning patchwork and Quilting

Linking with Susan for Midweek Makers and Jennifer for Wednesday Wait Loss.

Allison

 

 

1 thought on “Making a Spiral Template for Walking Foot Quilting

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: